Check the water heater anode rod
- How often
- Every 2 years
- Best time
- Mar
- Time
- 60 min
Handy DIY
Why it matters
The anode rod corrodes instead of your tank. Replacing a $30 rod can add years to a $1,500 heater.
How to do it
- 1Turn off power or gas and the cold supply, and drain a few gallons.
- 2Unscrew the anode (a hex head on top of the tank) with a 1-1/16" socket.
- 3Replace it if it's under 1/2" thick or exposed steel wire is showing.
⚠️ Safety: Skip this if the tank is under warranty and the manual says not to, or hire a plumber.
General guidance for typical US homes. Follow your manufacturer's instructions and local codes, and hire a licensed pro when in doubt.
Never forget this one again
Housebeat builds your home's full maintenance plan in 60 seconds and reminds you when each job is due. Free.
Build my free plan →